1546,00 € – 2131,00 €
Complete kit for ZF 8HP transmission control: TCU 2.0, PCB, Program Switch, LCD Display and wiring harness option.
FULL TCU TURBOLAMIK KIT
TCU TurboLamik
PCB
WIRING HARNESS: UNIVERSAL CAN OR ANALOG OR 6HP TO 8HP OR F Series PNP BMW OR G Series PNP BMW / TOYOTA SUPRA A90
Program Switch
LCD DISPLAY
TurboLamik TCU 2.0 is an advanced transmission controller for the extremely popular and durable ZF 8HP transmissions.
It allows you to control the gearbox in 8 modes varying from gentle automatic to race sequential style with extremely quick shift times.
TCU 2.0 was the first 8HP controller on the market and it has been in continuing development for over 10 years.
It’s been successfully installed in thousands of vehicles from everyday cars to high HP drag cars. Also very popular for track use and drifting due to the clutch option and high transmission reliability.
Supports: 8HP45, 8HP50, 8HP55, 8HP70, 8HP75, 8HP90, 8HP95
8HP51 and 8HP76 are supported with additional parts.
TCU 2.0 can be used for: Street use, Drag Racing, Race, OFF ROAD, Drift, Hill Climb.
8 driving modes — from an OEM automatic feel to full race with a flip of a switch. Manual, auto, semi-auto shifting via shifter, sequential shifter or paddles. Transbrake option. Automatic adaptation. Self-diagnosis with error codes on external display.
This TCU also supports a digital clutch — drive your car like a manual transmission, do burnouts and clutch-kick the trans for drifting.
Your ZF 8HP gearbox will need a TCU modification to bypass the internal controller. A PCB board is soldered in place of the factory TCU and all gearbox commands are executed externally using TurboLamik TCU.
TurboLamik carries 12-month manufacturer warranty and is not returnable.
